CBM CBM1000 Istruzioni per gli Interventi Scaricare il pdf (Pagina 26)

— 8 —

2.3.4 Sensor Position and Cutter Position

Black mark sensor position

(11mm) (40mm)

(18mm) (12mm)

Label interval

Sensor position

(27mm)

CAUTION:

Observe the following rules on the usage of the auto cutter:

• Every cut paper should be no less than 10 mm in length.

• When cutting a label roll, be sure to cut the base sheet. Never cut labels (tags).

Manual cutting position

Auto cutting position

Top print line

Paper feed direction

CAUTION:

When using label sheet:

• Be sure to cut the base sheet at every label gap. Otherwise, the cutter performance

will be immensely degraded.

• Never open the printer cover while printing as proper print operation may not be

guaranteed. Opening the printer cover may alter label length setting or other

parameters.

• Never use label rolls with different label sizes or label gaps as proper print

operation will not be guaranteed.

Peeler sensor position

CAUTION:

• With a label roll using black marking, the printer could print in label gaps. The user

should take the necessary corrective action to avoid this.

• If black marking is used for label sensing, the printer can print over cut lines. This

requires the appropriate user adjustment, however.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 229 230

Nessun commento

CBM CBM1000 Istruzioni per gli Interventi Pagina 26